Fault codeP2100
MODERATEThrottle Actuator Control Motor Circuit/Open
What this code means
Throttle Actuator Control Motor Circuit/Open.
P2100 is a generic code: it means the same thing on every make. P2100 belongs to family P21xx — Electronic throttle and mixture. Its page explains how to read a code and groups all its codes by part.
Type of fault
The control unit no longer sees continuity in this control circuit: a broken wire, an unplugged connector, or an open winding in the component. A multimeter checks both the component's resistance and the continuity of the wires.
Throttle and accelerator pedal position sensors
On modern cars there is no cable between the pedal and the engine: sensors in the accelerator pedal tell the control unit how far you press, and an electric motor opens the throttle, whose position is measured by two more sensors. Each position is measured twice for safety, and both signals must agree.
What you notice
The engine often goes into limp mode: idle speed or very limited power, the accelerator barely responding. Sometimes jerks or idle speed surges.
How to check it
Check the connectors on the pedal and on the throttle body. A dirty throttle body can disturb the readings: cleaning it, then a relearn procedure, fixes some cases. Klaro shows the throttle and pedal positions; pressing the pedal slowly, they should rise smoothly without jumps.
Watch it live in Klaro
With an OBD2 adapter plugged in, these live readings show the part at work, when your car reports them:
- Throttle position
- Relative throttle position
- Absolute throttle position B
- Accelerator pedal position D
- Accelerator pedal position E
- Commanded throttle actuator
What to do
Have it checked this week. The car remains usable, but the fault will not clear itself and will fail the roadworthiness test.
Clearing a code switches the light off but repairs nothing: if the fault remains, the code comes back. Clearing a fault code yourself →
How to read this code
- PPowertrain
- 2standardised code
- 1Electronic throttle and mixture
- 00P2100
Other codes for the same part
- P2101Throttle Actuator Control Motor Circuit Range/Performance
- P2102Throttle Actuator Control Motor Circuit Low
- P2103Throttle Actuator Control Motor Circuit High
- P2104Throttle Actuator Control System - Forced Idle
- P2105Throttle Actuator Control System - Forced Engine Shutdown
- P2106Throttle Actuator Control System - Forced Limited Power
- P2107Throttle Actuator Control Module Processor
- P2108Throttle Actuator Control Module Performance
- P2110Throttle Actuator Control System - Forced Limited RPM
- P2111Throttle Actuator Control System - Stuck Open
- P2112Throttle Actuator Control System - Stuck Closed
- P2118Throttle Actuator Control Motor Current Range/Performance