KlaroFault codeP0462
MODERATEFuel level Sensor Circuit Low Input
What this code means
Fuel level Sensor Circuit Low Input.
P0462 is a generic code: it means the same thing on every make. P0462 belongs to family P04xx — Emission controls. Its page explains how to read a code and groups all its codes by part.
Type of fault
The control unit reads a voltage on this circuit below its expected range. Usual causes: a wire shorted to ground or broken, a corroded or loose connector, or the component itself. Check the wiring and connector before replacing the part — that is where many of these faults turn out to be.
Fuel level sensor
The fuel level sensor, a float in the tank linked to a variable resistor, tells the gauge and the control unit how much fuel is left. The control unit uses it in particular to suspend some tests, like the EVAP leak test, when the tank is nearly empty or full.
What you notice
A fuel gauge that is wrong, jumps or stays stuck; a low-fuel warning that is unreliable.
How to check it
The sensor is usually part of the pump module in the tank; check its connector on top of the tank first. Fill up and see whether Klaro's fuel level follows. A reading that jumps as you move often points to a worn track on the resistor.
Watch it live in Klaro
With an OBD2 adapter plugged in, these live readings show the part at work, when your car reports them:
- Fuel level
What to do
Have it checked this week. The car remains usable, but the fault will not clear itself and will fail the roadworthiness test.
Clearing a code switches the light off but repairs nothing: if the fault remains, the code comes back. Clearing a fault code yourself →
How to read this code
- PPowertrain
- 0standardised code
- 4Emission controls
- 62P0462
