Fault codeP0823
MODERATEGear Lever X Position Circuit Intermittent
What this code means
Gear Lever X Position Circuit Intermittent.
P0823 is a generic code: it means the same thing on every make. P0823 belongs to family P08xx — Transmission (continued). Its page explains how to read a code and groups all its codes by part.
Type of fault
The signal drops out or jumps from time to time. This is typical of a poor contact: a loose or corroded connector, or a chafed wire that touches intermittently, often triggered by vibration or heat. The fault may disappear and come back; checking the wiring with the engine running is often revealing.
Gear lever and shift buttons
On automatic and automated gearboxes, sensors in the gear lever and buttons on the steering wheel or lever tell the gearbox control unit what the driver requests: manual mode, upshift, downshift, sport mode.
What you notice
Manual mode or paddles that do not respond, a wrong gear shown on the dashboard, sport or winter mode that does not engage.
How to check it
Check the connectors under the gear lever and behind the steering wheel, and the lever's mechanism. Spilled drinks in the console are a classic cause of faults on these sensors.
What to do
Have it checked this week. The car remains usable, but the fault will not clear itself and will fail the roadworthiness test.
Clearing a code switches the light off but repairs nothing: if the fault remains, the code comes back. Clearing a fault code yourself →
How to read this code
- PPowertrain
- 0standardised code
- 8Transmission (continued)
- 23P0823
Other codes for the same part
- P0814Transmission Range Display Circuit
- P0815Upshift Switch Circuit
- P0816Downshift Switch Circuit
- P0819Up and Down Shift Switch to Transmission Range Correlation
- P0820Gear Lever X - Y Position Sensor Circuit
- P0821Gear Lever X Position Circuit
- P0822Gear Lever Y Position Circuit
- P0824Gear Lever Y Position Circuit Intermittent
- P0825Gear Lever Push - Pull Switch (Shift Anticipate)
- P0826Up and Down Switch Input Circuit
- P0827Up and Down Switch Input Circuit Low
- P0828Up and Down Switch Input Circuit High